THIS IS OUTDATED FIRMWARE. CHECK SUPPORT PAGE FOR LATEST RELEASE!
HTG GCU 1.0.19 change log
Overview #
REQUIRED STEPS: as always – install latest HTG SUITE, connect to GCU (Shift + C), download config from GCU (Shift + D), send to GCU (Shift + S). This procedure updates config to latest version. Now go to GCU tab -> LOADER and upload latest firmware-1.0.19.
GCU general: #
- Added Ecumaster CAN switchboard v3 preset
- Added Holley ECU CAN preset (beta)
- Added BMW E92 M3 ECU CAN preset (beta)
- Added BMW F80/30 dashboard CAN preset
- Improved BMW F10 ECU CAN preset
- Added BMW F80/30 ECU CAN preset
- Added PWR_out fault codes
- Added adaptation progress fault codes
- Added adaptation status indicator in data logger and status bar
- Improved DBW mod – strategies using pedal position as axis will no longer be affected by momentary blipped/reduced value and will use raw pedal position
- DBW mod no longer requires two inputs and outputs – added support for single input setups
- DBW mod can now be used in conjunction with CUT/BLIP tables and is no longer triggered by them – mode is selected in “General settings”
- DIG_in and PWR_out objects are no longer generated automatically – user is now able to create them manually
- Fixed “Current Gear” channel showing value other than 0 in Neutral mode in some scenarios
- Auto mode updated – multiple shifts with short verification times
- Added MaxxECU CAN bus frame length verification
ZF 6/8HP: #
- Enabled DBW mod for 6HP transmission family
- Expanded TCC CL control of decoupling
Dual Clutches: #
- D and R mode engagement softened
- Improved fork selection algorithm
- Added clutch quick-charge table – take-up and shifting scenarios may have individual quick charge parameters
- Added take-up pressure limit table – in function of RPM and TRQ
- Improved cooling control
HTG suite: #
- Changed Haltech IOB object names
- Fixed DBW mod tables scaling to % instead of raw value
- Fixed TACHO output not saving object assignment
- Faults updated
- Added adaptation progress indicator
- Logs, backups and CAN dumps moved to “DOCUMENTS/HTG TUNING data”
- Suite no longer overwrites custom inputs assigned to functions when presets are used
- IO configuration column scaling improved