HTG tuning DCU Differential Control Unit utilises 2 connectors that have inputs and outputs split in a way to allow easy and tidy wiring for differential, transfer cases and chassis.
| DCU 12-pin | Description | Notes |
|---|---|---|
| X1 | DCU_POS_in1 | Diff position signal |
| X2 | DCU_POS_in2 | Diff position signal |
| X3 | DCU_+5v_OUT | Sensor 5v output (200mA) |
| X4 | DCU_PWR_out_1 | Motor output |
| X5 | DCU_PWR_out_2 | Motor output |
| X6 | DCU_PWR_out_3 | Motor output |
| X7 | DCU_sGND | Sensor ground |
| X8 | DCU_sGND | Sensor ground |
| X9 | DCU_sGND | Sensor ground |
| X10 | DCU_TEMP_in1 | Diff temperature signal |
| X11 | DCU_TEMP_in2 | Diff temperature signal |
| X12 | DCU_sGND | Sensor ground |
| DCU 6-pin | Description | Notes |
|---|---|---|
| Y1 | DCU_GND | Chassis GND, KL31 |
| Y2 | DCU_+12v_IGN | Ignition switch, KL15 |
| Y3 | DCU_+12v_const | Constant +12v supply, KL30 |
| Y4 | DCU_CAN_Lo | Software enabled termination |
| Y5 | DCU_CAN_Hi | Software enabled termination |
| Y6 | DCU_AN_in1 | Analog input |
HTG DCU Differential Control Unit #
The “HTG DCU” a groundbreaking product from HTG Tuning, revolutionizes another realm of advanced vehicle tuning. This standalone differential and transfer case controller is engineered to offer enthusiasts and professionals unparalleled control and customization for vehicle performance.
€800,00
