Full PRESET support list for HTG products.
Valid for 1.0.14 release (24.10.2023)
HTG tuning GCU Gearbox Control Unit and HTG IO CAN gateway are flexible enough to support any combo and custom electronics but those that are most popular are added as preset for easy configuration. If You cannot find Your desired position on the list reach out to our support email!
SUPPORTED TRANSMISSIONS #
Getrag GS7 BMW DCT 7 speed #
| BMW DCT | HTG GCU support | HTG IO CAN support |
|---|---|---|
| E82 135i DCT | YES | YES |
| E89 Z4 DCT | YES | YES |
| E92 335i DCT | YES | YES |
| E92 M3 DCT | YES | YES |
| F80 M3 DCT | YES | YES |
| F82 M4 DCT | YES | YES |
| F10 M5 DCT | YES | YES |
Ford R transmissions #
| Ford R transmission | HTG GCU support | HTG IO CAN support |
|---|---|---|
| Ford 6R80 | YES | |
| Ford 10R80 | BETA |
GM L transmissions #
| GM L transmission | HTG GCU support | HTG IO CAN support |
|---|---|---|
| GM 6L50 | in progress | |
| GM 8L90 | in progress | planned |
| GM 10L80 | BETA |
Porsche PDK (ZF 7DT45/75) #
| Porsche PDK | HTG GCU support | HTG IO CAN support |
|---|---|---|
| 911 991 PDK | YES | BETA |
| 911 991.1 PDK | YES | BETA |
| 911 991.2 PDK | YES | BETA |
| 911 997.2 PDK | YES | |
| 718 GT4 Clubsport PDK | YES | BETA |
| 718 Cayman/Boxster PDK | YES | |
| 981 Cayman/Boxster PDK | YES |
Tremec TR transmissions #
| Tremec TR | HTG GCU support | HTG IO CAN support |
|---|---|---|
| TR 9070 | BETA | |
| TR 9080 | YES |
VW DSG (Direct Shift Gearbox) #
| VW DSG | HTG GCU support | HTG IO CAN support |
|---|---|---|
| DQ250 gen1 | YES | planned |
| DQ250 gen2 | YES | planned |
| DQ381 | YES | |
| DQ500 gen1 (Continental) | YES | planned |
| DQ500 gen2 (BOSCH) | YES | planned |
| DL501 | temporarily discontinued | |
| DL800 Huracan/R8 | YES | planned |
ZF 6HP #
| ZF 6HP | HTG GCU support | HTG IO CAN support |
|---|---|---|
| ZF 6HP19 | YES | NO |
| ZF 6HP21 | YES | NO |
| ZF 6HP24 | YES | NO |
| ZF 6HP26 | YES | NO |
| ZF 6HP28 | YES | NO |
| ZF 6HP32 | YES | NO |
ZF 8HP 8 speed #
| ZF 8HP | HTG GCU support | HTG IO CAN support |
|---|---|---|
| ZF 8HP45 | YES | YES |
| ZF 8HP50 | YES | YES |
| ZF 8HP51 | YES | |
| ZF 8HP55 | YES | BETA |
| ZF 8HP56 | YES | BETA |
| ZF 8HP70 | YES | YES |
| ZF 8HP75 | YES | YES |
| ZF 8HP76 | YES | BETA |
| ZF 8HP90 | YES | YES |
| ZF 8HP90A | YES | BETA |
| ZF 8HP95 | YES | BETA |
| ZF 8HP96 | YES |
ZF 9HP 9 speed #
| ZF 9HP | HTG GCU support | HTG IO CAN support |
|---|---|---|
| ZF 9HP | BETA |
Preset ENGINE control units (ECU) #
All HTG products share same device presets – it means that below list applies to HTG GCU, IO CAN, DiffControl etc.
Standalone ECUs #
- AEM:
- Infinity series
- EcuMaster: INTEGRATION INSTRUCTIONS
- EMU Classic
- EMU Black
- EMU Pro
- EMtron:
- SL series
- KV series
- Fueltech:
- FT450
- FT500
- FT550
- FT600
- Haltech: INTEGRATION INSTRUCTIONS
- Platinum series
- Elite series
- Nexus R3
- Nexus R5
- Holley:
- Dominator
- HP
- Terminator
- Terminator X Max
- Sniper
- Link ECU:
- G4+
- G4X
- G5X
- MoTeC
- MaxxECU
- SCS Delta
- Syvecs
OEM ECUs #
HTG SUITE supports variety of OEM ECUs. If Your ECU is not listed please reach out to our Support Team and we will look into adding it’s support
*LIST to be added*
TO BE CONTINUED.
